In the static state, we can take the following methods: check the left and right sides of the rear wheel respectively, and the right side is a line, not a straight line, indicating the overall frame; the measurement of the gap between the rear wheel and the wheel cover should be roughly the same, or the overall interpretation Check the hood and wings for signs of frame or bend clearance; check the door and fender seams, door and door clearances, if the gap is asymmetrical, the hood and doors may need to be replaced, which of course is related to the accident.
Open the used car engine cover and look at the two longitudinal beams of the entire engine room and check that they have no traces of welding or cracking. If this is an end or side impact accident, the frame is squeezed and bent or cracked and both require welding repair. If the condition of the lifting frame, you can check out the obvious, because the vast majority of car chassis, as the ribs pass before, you can determine whether there are any accidents through the ribs are not straight and strengthen the inspection.
QL Sheet Metal makes it easy to design and order custom parts with a brush finish. Sheet Metal Brushing creates a surface texture that removes and hides surface defects. Metal brush finishes have a parallel grain resulting from an abrasive moving against the work piece in one direction.
Applications :
This type of metal brush finish is often used to create a uniform appearance on aluminum, stainless steel, copper, brass, etc. This is Brushed Metal Sheet including Brushed Stainless Steel, brushed aluminum sheets, etc.
Examples
The process is often applied to custom metal brackets, custom front panels, custom Sheet Metal Boxes decorative parts, sculptures, surfaces, enclosures, etc.
Sheet Metal Brushing
Sheet Metal Brushing,Brushed Stainless Steel,Brushed Metal Sheet,Brushed Aluminum Sheets
QL Sheet Metals Co.,Ltd , http://www.ql-metals.com