Li Hongxing, Zhang Xinqing, Tian Liwen Anyang Iron and Steel Co., Ltd., Anyang 455004, Henan Province realized the basic automation of the grinding machine and met the process requirements.
1 Introduction Anyang Iron and Steel Co., Ltd. (referred to as Angang) medium plate M84100 roll grinder is dubbed for the three-roller lathe mill and was put into use in 1975. Since the 2800mm four-roll mill was put into production, the four-roller mill was eliminated, but the four-roll mill was not commissioned at the time, and the four-roll mill had a large volume, heavy weight and high grinding accuracy. The M84100 roll grinder can not meet the technical requirements of the work roll grinding of the four-high mill. Considering the good mechanical properties of the M84100 roll grinder, it is decided to carry out technical transformation, using PLC control and frequency control, full digital DC adjustment. Advanced control settings such as speed systems replace the original relay control section to meet the requirements of the new sound grinding process.
2 Design and implementation of the total sound capacity of 186CW, a total of 21 large and small motors installed, of which the total capacity of DC motor is 120kW, AC motor total 4.3 automatic restart protection function instantaneous power failure restart function set value selection 0 , the instantaneous power failure and restart does not work. After the abnormal power failure occurs, the protection function is activated. When the power is restored, the inverter stops outputting and stops. Restarting when the protection function reset command and the rerun command are input further improves the safety and reliability of the set sound.
The capacity is 66kW, and several beds use three-phase 380V, 50Hz AC power. The drive system of the machine tool includes the following aspects: workpiece drive: DC generator with continuous magnetic motor control system controlled by magnetic amplifier; grinding wheel drive: using magnetic amplifier, DC generator, DC motor speed control system; The motor amplifier is always a motor speed control system.
The working principle of the M84100 roll grinder is: firstly start the static pressure pump to lubricate the grinding machine, then start the workpiece motor to drive the workpiece (end)
Tower Crane Control Console (also called Tower Crane Linkage Console, Tower Crane Joysticks, Joystick Master Controller ) is mainly used to control the starting, speed adjusting, braking and reversing.
BQ Tower Crane Controller Joystick adopts the controlling system of F0/23B,H3/36B, which can be widely used for tower cranes of all kinds of specifications and conditions.
Each mechanism of the product can be equipped with potentiometer and encoder, and the voltage,frequency and speed of motor can be controlled by matched electrical system.
It is also can made up with metal cover or other hoisting console model according to the customers' requirement.Operation system sets 0 self-lock and self reseting device for working safety and reliability.
Each part of the system can additional installed potentionmeter and encoder,through the assorted electronic control system to pressure regulating, frequency conversion,AC speed regulatin to control the speed. We provide all kinds of joysticks for different type tower crane.
BQ has more than 15 years tower crane experience. We will supply you best professional advice. 24 hours customer service give you quickly feedback.
Tower Crane Controller Joystick,Tower Crane Joysticks,Tower Crane Linkage Console,Joystick Controller,Joystick Master Controller
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com