15kw Air Cooled Industrial Chiller for Plastic Industry

Specifications: 
Notes: 1. Cooling capacity is based on: Chiller water inlet and outlet water temperature of 12ºC/7ºC, the cooling water inlet and outlet water temperature of 30ºC/35ºC
2. Scope of work: Chilled water temperature range: 5ºCTO35ºC; Chiller water out of the water temperature: 3ºCTO8ºC
The cooling temperature is not higher than 35ºC environment
The above can be customized according to customer requirements to produce
Specification dimension above are subject to change without notice












Our Services: 
ØWith decades years professional experience in refrigeration industry; 
ØOEM/ODM services available, new design updates regularly; 
ØWe offer all of products with 12 months warranty; 
ØPrompt reply, fast delivery, professional after-sales service. 

FAQ: 
1. How to choose a proper Chiller? 
Tip1. The cooling capacity. 
Tip2. The inlet and outlet water temperature, and the environment temperature. 
Tip3. The power. 
Tip4. The rifrigeration you need. 
Tip5. Other special requirments. 
2. If the cooling capacity of Chiller bigger is better? 
No. 
The use of cooling capacity too large, will not only result in the waste of resources, but also the machine itself will produce more noise, therefore we must choose a appropriate chiller. 

Here we mainly recommend some engine timing tools for different vehicle, automotive engine timing tool kits include some parts as below:

Tension Pulley:This is a tension device which is used on the automotive transmission belt system, it is mainly composed by fixed shall, tension arm, wheel body, torsion spring, rolling bearing and spring bushing etc. It can adjust the tension automatically according to the different tightness of the belt, so that the transmission system is stable and safe. The belt is easily to become longer after used for a long time, the tension pulley can adjust the tension of the belt automatically ,make the belt running more smoothly, reduce the noise and anti-slipping.

Timing belt: This is a important part of the engine gas system,it is connected by a crankshaft and a certain transmission ratio to ensure the accuracy of intake and exhaust time. Why we use a belt but not a metal gear? Because the noise of belt is small, rotate accurately, it`s own change is small and easy to compensate. But it`s obvious the life of belt is must shorter than metal gear, so we should replace the belt regularly.

Idle wheel: It`s main function is to help the tension pulley and timing belt, change the direction of belt, increase the bearing angle of belt and wheel.

Besides of above parts, the engine timing tool kits also include screw bolt, nut, pad and some other parts.

[BWM]

[Mercedes Benz]

[Audi VW ]

[Porsche]

[Alfa Romeo/Land Rover/Jaguar]

For Different Makes Tools

Engine Timing Tool Kit,Diesel Engine Timing Tools,Silent Bearing Removal,Extractor Kit

Shenzhen Cartrend Technology Co, Ltd , http://www.cartrendthings.com