Tea is one of the three major beverages in the world, and China is the world's largest producer of tea and the second largest exporter of tea. From the domestic point of view, drinking tea has become a living habit of most Chinese people. Tea has become an indispensable health drink and a spiritual drink in social life. Moreover, with the popularization of people’s healthy consumption concepts, tea is increasingly being Many people accept, love and pursue. From the perspective of international demand, Chinese tea exports have maintained a steady growth.
Tongyi Air High Temperature Heat Pump Dryer becomes the new favorite of tea drying industry
China's existing tea processing technology is low in content, product quality is not high, and the added value of products is low, which leads to lack of market competitiveness of products and directly affects the sustainable development of the industry. Drying is an important process in the tea processing process. The use of conventional electric heating, coal-fired boiler equipment drying of agricultural products, large investment, the need to consume large amounts of energy, resulting in higher cost of agricultural products, and cause varying degrees of environmental pollution.
In response to the traditional problems of low drying efficiency and high cost, Tongyi Air has developed a high-temperature heat pump dryer based on advanced technology and R&D experience. The unit passed rigorous experimental data tests, and all tea drying process indicators met the design requirements. Drying tea leaves with it not only saves energy, safety and environmental protection, saves a lot of labor costs, but also allows soluble tannic acid in tea to be retained, which is beneficial to the improvement of tea quality and is deeply loved by tea farmers.
At present, Tongyin Air Energy High-Temperature Heat Pump Dryer has begun to be applied in the fields of agriculture, industry, textiles and other fields with advantages of energy-saving, high-efficiency, safety, and pollution-free. It has been well evaluated by industry insiders and users. Now, the heat pump drying equipment has gradually replaced the traditional boilers, earth room baking, etc., and has become the middle of the drying industry.
The Lap-joint Flange is a kind of the flange,which is set on the end of the pipe through the stub end and steel ring ,The Lap-joint Flange moves on the end of the pipe.
Production Size:DN10-DN2000
Pressure range:PN2.5,PN6,PN10,PN16,PN25,PN40,PN100
Production Standard:BS,JIS,GOST,ANSI,DIN,GB
Main Material of parts:
A105,20#,Q235,16Mn,A350 LF1,LF2,CL1/CL2,LF3 CL1/CL2,A694 F42,F46,F48,F50,F52,F56,F60,F65,F70;A182 F304,304L,F316,F316L,321,18-8,A182F1,F5a,F9,F11,F12,F22,F91,A182 F12,F11,16MnR
The Lap-joint Flange are generally used with the parts (expansion joint),The Lap-joint Flange are installed the two ends of the expansion joint,which connects to the pipe.
Lap-joint Flange
Ansi Forged Lap-Joint Flange,Raised Face Lap Joint Flange,Forged Lap Joint Flange
CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.hj-pipeline.com