Different cars, different maintenance methods, then, what are the tips for refrigerating cars ?
A · Lubricant to buy the right
Lubricants are more than all the cars can consume. Lubricating oil is one of the most important protection products for automobiles. The selection of good quality lubricants can effectively protect the engine and reduce wear. Most refrigerated trucks will be cooled by mechanical refrigeration systems, which also imposes requirements on lubricants. In order to make the vehicle have better economical use. It is necessary to consider not only the wear necessary for the machine, but also the consumption of the chiller when it is in operation, so the quality of the lubricating oil must be improved. Many people prefer to import, the more expensive the better. In fact, this is a misunderstanding. The transportation situation of domestic cars and foreign cars is different. Not all of them are suitable for our car. And the price of imported oil is 30%~40% more expensive than domestically-made brands, which is more than twice as expensive as general domestic oil. Therefore, it is not necessary to blindly pursue high-priced brands. Lubricants should be selected based on the requirements of the engine. It is not necessary to use high-grade lubricants on less demanding engines, nor to use lower-grade lubricants on more demanding engines.
II. Scientific and rational maintenance of cars
The vehicle maintenance cycle is the interval or time between car maintenance. High maintenance frequency is not a good thing and can more effectively protect the performance of the vehicle. At the initial stage of buying a car, the functions of the car are relatively complete, and the response is relatively good. It is only necessary to pay more attention to appearance maintenance and moderate internal protection. However, with the increase in the use of time, various problems are exposed, and the maintenance cycle must be appropriately shortened. Need to frequently check commonly used components, such as wipers, filters, etc., in time to replace, can extend the life of refrigerated trucks, not only to protect the car, but also for their own safety considerations.
3. Fill up your fuel tank
It is not uncommon for fuel tanks to become underfilled. Some owners often add only a small amount of oil to the tank and refuel at the time of depletion. In fact, this will cause the fuel pump in the upper part of the tank to often not be cooled by the fuel and be easily burned. It is usually easier to choose a refrigerated truck with less fuel consumption or with its own fuel saving device.
IV. Clean up the car in time
Cleaning should not only take care of the external clean-up, but also the interior is equally important. Due to the special features of refrigerated trucks, there are often substances such as grease, water, salt, etc. that not only seriously erode the goods, but also can cause long-term accumulation of the car's insulation function. The decline, especially in medical refrigerated trucks, may even trigger security accidents.
Buy a good car and take care of it to make it longer.
Ball Bearings are used in many kinds of machines and devices with rotating parts. The characteristics are as following:
1.low starting and good operationg friction.
2.the ability to support conbined radial and thrust loads.
3.less sensitivity to interruptions in lubrication.
4.no self-excited instabilities
5.good low-temperature starting.
Ball Bearing
Ball Bearing,Deep Groove Ball Bearing,Angular Contact Ball Bearing,Thrust Ball Bearing
Xibei Bearing Co.,Ltd. , https://www.nxzjck.com