Sewage car maintenance tips

The main function of the sewage suction truck is to suck sewage and suck dirt. The work content is very important. Without the help of the sewage suction truck, the sewage in the city is difficult to dispose of. In order to allow the sewage suction truck to maintain its normal working condition for a long time, it is necessary to be able to perform proper maintenance on the sewage suction truck so that it can perform its normal work well and extend its life. Then, what are the tips for the maintenance of sewage suction vehicles? The following Xiaobian teaches you some maintenance tips for sewage suction trucks.

图片6_副本

Sewage car maintenance tips:

1, always check the engine's oil. Sewage suction truck parked on a flat surface, and then take out the vernier to check the amount of engine oil, when the number of oil is in the

Within the range of (F) and (L) markings, then its oil value is normal; if its oil value is less than (L), it is necessary to add the corresponding model oil to the engine, but it reminds The increase in oil must be below (F) and not exceed (F).

2, the tank must be full. If the fuel tank is not full, it will cause the upper part of the fuel pump to fail to cool, and the heat burn will need to be replaced. A small fuel pump will cost several hundred dollars.

3, lubricating oil can be replaced regularly. Suction truck driving mileage of more than 5,000 kilometers will need to change the lubricating oil, in the selection of lubricating oil, some owners will look at its price, in fact, according to the actual needs of the engine to select the appropriate type of lubricant, so it played The effect will be better.

4, the filter should also be replaced regularly. The filter on the engine will affect the quality of use of the lubricant and the purpose of use, but also need to replace it regularly.

5, the tire gas can not be filled with full, it is necessary to regularly check the tire pressure above it, it is recommended that the tire pressure examination as far as possible arrangements for the morning.

What are the tips and tricks of the Sewage Cart Maintenance? In addition to paying more attention to the maintenance during the daily use, the Sew Truck owner must also be able to drive the Sewage Pump to the appropriate maintenance point. Professionals are requested to complete the relevant technologies and accessories. Specific maintenance work.


Sany Concrete Pump Spare Parts

HBYM GROUP LIMITED is a leading supplier of Sany Concrete Pump Spare Parts In Hebei China. We have more than 10 years experience in this business.We have many business cooperstion over the world.We would join many exhibitions each year to expand oue market.

Our Sany Concrete Pump Spare Parts include : Wear Spectacle Plate , Cutting Ring , Concrete Pump Delivery Cylinder , Original Agitator Motor , Plunger Cylinder , Outer Housing , Discharge Support , Wear Sleeve ,Bushing , Piston , Swing Lever and Sany Elbow , etc...

1.Sany Concrete Pump Parts

  sany conveying cylindersany dn260 wear plate 5  Sany DN260 Cutting Ring  sany plunger cylinder 3

     Sany Delivery Cylinder         Sany Wear Spectacle Plate          Sany Cutting Ring              Sany Plunger Cylinder

hydraulic cooler 3  sany Battery  4  sany dn230 s valve 3  SANY filter 1

       Sany Cooler Radiator                Sany Battery                           Sany S Valve                 Sany Hydraulic Oil Filter

sany swing lever 11  sany upper housing 5  thrust spring 5  Sany seal kits 210 3

         Sany Swing Lever                 Sany Support Flange               Sany Thrust Ring                    Sany Seal Kits

discharge support 2  sany discharge support 3  sany original motor 3  sany piston 2

  Sany Discharge Support-1    Sany Discharge Support-2         Sany Agitator Motor         Sany Concrete Pump Piston

sany accumulator  seal kit for upper housing 3  Sany seal kits 230 3  seal kits for mixing 2

          Sany Accumulator       Seal Kits For Upper Housing           DN230 Seal Kits                    Sany Mixing Seal Kits


Our Company

10 years experience,HBYM GROUP LIMITED is a manufacture trading company.         Factory

We are located in Hebei province. Our main business include concrete pump 

spare parts, concrete pipe, concrete elbow and clamp. We supply spare parts 

for Putzmeister Pump, Schwing Pump, Zoomlion Pump, CIFA Pump, Kyokuto 

Pump etc. Besides we could also produce parts as customers` drawing.We have professional working team, business team, technical team, service team.Our 

annual sales about USD 5million.Our business market mainly in North America, 

Eastern Europe, Africa, Mid East, Western Europe and Domestic Market.



        20170412 103714        Factory 1



Sany Spare Parts

Sany Spare Parts,Plunger Cylinder,Ball Cup, Sany Swinging Lever

HBYM GROUP Co,.LTD , https://www.hbympumpparts.com

This entry was posted in on