Sulfur ore beneficiation technology (2)

Grinding and flotation section: Grinding adopts MQG1500*3000mm lattice ball mill and FLG-Ñ„1200 milli-sorghum single spiral classifier to form a closed-circuit grinding grading process. A total of three series. The process parameters are: ore size 11~0 mm; grinding concentration 75%; graded overflow concentration 30%; graded overflow fineness - 200 mesh accounted for 70%; actual production processing capacity 7.5 tons/set, hour, float is selected from the original design process: ore flotation, a crude concentrate of copper, lead separation, copper, lead concentrate; sulfur the coarse tailings, then select zinc, having a sulfur, zinc concentrate. This can be obtained from copper, lead, sulfur and zinc. At present, the process used in production is different from the original design. After the mixed flotation of raw ore, only copper and sulfur are separated, and copper and sulfur concentrate products are obtained. See process flow chart 2 for details. The flotation machine used is: 4A type 32 sets, 2A type 4 sets, single row configuration. By flotation and sorting, the ore containing 14.15% sulfur and 0.2% copper is enriched to 32~35% sulfur and 14% copper. The recovery rate of sulfur concentrate is 93%, copper concentrate recovery rate. At 45% or more. The final tailings contain 1.22% sulfur and 0.02% copper. The types, dosages and locations of flotation reagents are shown in Table 4.

Concentrate dewatering section: Concentrated and filtered two-stage dewatering process. See Figure 3. The concentrate of sulfur concentrate is one Ñ„9m thickener, the production capacity is 80 tons/set. Day; the dam position treatment quota is less than 1.3 tons/day.m2. The copper concentrate is concentrated into a Ñ„ 3.6 m thickener. The sulfur concentrate is filtered by a 18 m 2 disc filter, equipped with a SZ-3 vacuum pump and an SZ-2 pea air compressor. When the concentration of the ore is 60~65%, the moisture content of the filter cake is 10~12%, the thickness of the filter cake is 15~20 mm, and the production capacity is generally 3.44 tons/set. The copper concentrate is filtered using a 3 m 2 external filter. The flotation concentrate flows into the concentrator, and the concentrated bottom stream flows into the filter, and the filter cake falls into the concentrate grab bucket. The concentrator overflow and the filtrate of the filter are combined and flowed into the sensation pond to recover the fine concentrate, and the overflow water is discharged outside the plant.

Tailings facilities: Flotation tailings are transported to the tailings dam by two stages of pressure, and the pressure pump is 2PSA type. The tailings pipe has a diameter of 100 mm, a line length of 350 m, and a tailings transport concentration of 25%. The clarified tailings water is directly discharged and is not recycled. The content of xanthate and pine oil in sewage has exceeded the discharge standard, and no treatment has yet been started.

Look to LianJiu for a Ball Valve selection that can handle pressures up to 700 bars and temperatures to 400°F. As a type of quarter-turn valve, ball valves can shut off liquid flow from a pipe. An attached lever helps allow a spherical port to reopen flow and shut it off again. By selecting your ball valve according to how the casing around the ball is manufactured and assembled, you can direct flows in multiple directions, such as with a three-way ball valve. You also can accommodate consistently high-pressure applications with a trunnion ball valve with durable anchor points around the ball. Shop Grainger today.
LJ90 Series unibody economy ball valves are a great choice for lower pressure general hydraulic and petroleum shut-off needs. Valves are unibody bar stock construction with phosphate-coated bodies and NPT threaded connections in a reduced port design. Built strong and designed to last longer than lightweight imports. 

Key Benefits:
Unibody Construction
Blowout-Proof Stem Design
RTFE Seats and Seals
Options:
Stainless Steel Ball and Stem (OA)
Latching Lockout Handle Kit (OP)
[Gull Wing" Tee Handle (OE)
Oval Handle (OQ)

Carbon Steel Ball Valves

Carbon Steel Ball Valve,Carbon Steel Valves,Carbon Manual Ball Valves,Carbon Ball Valves

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com

This entry was posted in on