Six major use of desktop electric centrifuges

At present, the laboratory is commonly used desktop electric centrifuges, desktop electric centrifuges fast rotation, pay attention to safety, in particular, to prevent the centrifuge during operation, due to imbalance or aging test tube, while the centrifuge while moving, Caused by falling from the test bench, or because the lid is not covered, the centrifugal tube ruptures due to vibration, and the glass fragments fly out and cause an accident. Therefore, when using the desktop motorized centrifuge, the following must be noted:

(1) Put cotton or test tube pad on the bottom of the sleeve.

(2) If there is noise or vibration of the fuselage, the power should be cut off immediately to eliminate the malfunction immediately.

(3) Centrifuge tubes must be placed symmetrically in the casing to prevent vibration of the body. If only one sample tube is to be replaced by another water of equal quality.

(4) When starting the centrifuge, the top cover of the centrifuge should be covered before it can be started slowly.

(5) After the separation is completed, close the centrifuge first. After the centrifuge stops rotating, open the centrifuge cover and take out the sample. Do not force it to stop using external force.

(6) Centrifugation time is usually 1 to 2 minutes. During this period, the experimenter must not leave to do anything else.

Bench-top electric centrifuges are widely used in biochemical, pharmaceutical, agricultural science, animal husbandry, food hygiene, environmental protection, pharmaceutical products and other production and research institutes, to separate particles of different densities; platelets, serum, plasma, urea, etc. for qualitative Analysis, ideal equipment for radioimmunoassay.

Crane Electric Parts are import components for supply power transmission and control of crane working. There are various electric parts of a crane such as crane electrical control box, crane hoist control pendant, crane coductor bar, crane operator operating console, crane current collelctor, crane overhload limiter, crane speed regulator, crane variable-frequency drive, crane travel switch, crane conductor, crane lift height limiter, crane circuit breaker, crane break, crane gear motor, crane motor, crane reducer, etc.

Weihua is a China leading crane manufacturer with 31 years experience. We provide all kinds of lifting equipment and electric parts. You can find our products all over China, also in 110 countries such as the UK, Russia, USA, Thailand, Ukraine, Egypt, Mexico, Pakistan, Malaysia, etc. We have confidence to provide you with the right products and professional solutions. Just let us know your needs.

Electric Parts

Electric Parts,Steel Copper Conductor Bar,Crane Copper Rail,Copper Aluminum Rail

Henan Weihua Heavy Machinery Co., Ltd. , http://www.weihuacranefactory.com