The main characteristics and technical parameters of the corrosion-resistant glass rotor flowmeter:
main feature:
1, the pressure loss is small. In the process of use, it can be fully utilized without much effort. All the pressures can be fully utilized without any loss.
2, reliable performance. In the operation of glass rotor flowmeter, it will not fail frequently and will ensure good operation. When people are using it, don't worry about its operation. Good performance, high reliability, can be used with confidence.
3, the structure is simple, easy to install and use. The structure of the glass rotor flow meter is relatively simple, the installation is very convenient, and it can be installed in a short time.
4, cheaper prices. Buying a glass rotameter is cheap and has a great price advantage.
Technical Parameters:
1, diameter: DN2 ~ 100mm;
2. Measurement range: water (20°C): 1L/h～100m3/h, gas (101325Pa, 20°C): 16L/h～3000m3/h;
3, turndown ratio: 10:1;
4, accuracy level: 1.5, 2.5, 4;
5, nominal pressure: DN4 ~ 10 1.0MPa, DN15 ~ 50 0.6MPa, DN80 ~ 100 0.4MPa;
6, working temperature: ≤ 120 °C;
7, connection: hose, metal pipe, flange (GB/T9119-2000);
8, material description: flange, float, guide bar, support plate and bolts are all stainless steel 304 (1Cr18Ni9Ti), model LZB-B.
If the wetted material is 316, the model is LZB-Bo and it needs to be customized.
For stainless steel lining PTFE, the model is LZB-BF (or BoF), need to be customized.
Core Tip: The above is the technical introduction of " Corrosion Resistant Glass Rotameter " . You can contact the sales staff or technical engineer of Zhongwei Company here to give you a detailed explanation of the specification, model, price of the flowmeter. And all other information materials.
Characteristics:
11 sizes available ranging from 19.5kW to 103.7kW cooling capacity.
Panels and frame are made from metal steel protected with polyseter powder painting to ensure total resistance to atmospheric agents.
High efficiency scoll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
Indoor ducted split unit with long air supply distance. Pre G4, Medium F7/F8 and HEPA H13 can be within the indoor Air Conditioner if needed.
Split installation, connected by means of flare/welding coupling.
Ducted Split Unit,Air Conditioner Ducted Split Unit,Duct Split Fan Coil Unit,High Quality Ducted Split Unit
Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com