Why do garbage trucks leak oil?

After more than a year and a half of loading, garbage trucks have seen oil spills. In many cases, garbage truck drivers do not understand how oil spills occur. In fact, the leakage of garbage trucks is mostly caused by the following problems. It is not a big problem, but daily leakage is not a solution.

The following are some common faults that have been summarized by the Garbage Truck Design Department of Chengli Special Purpose Vehicle Co., Ltd. The following points can be used to reduce the leakage of the garbage truck.
1. The product (accessory) is poor in quality, material, or process; there is a problem with the structural design of the garbage truck.

2. Improper assembly of high speed, improper mating surfaces, broken gaskets, displacement, or failure to install according to operating specifications.

3. The tightening force of the tightening nut is not uniform, the slide wire is broken or the looseness is loose, and the work is invalid.

4. Excessive wear, aging, and deterioration of the seal material after long-term use will result in loose seals due to deformation.

5. Too much lubricating oil, too high oil level or wrong oil.

6. Deformation and deformation of the joint surface of the components (such as side covers and thin-walled parts) and damage to the housing will cause the oil to leak out.

7. After the air plug and the one-way valve are blocked, due to the pressure difference between the inside and outside of the box, it often causes oil leakage in the weak sealing area.

Welded Mesh Fence

The Welded Mesh Fence adopts low-carbon steel wire, which is beautiful and durable, not easy to deform, easy to install, easy to install, flexible to assemble, and widely used. It can be used on roads, railways, and highways. It can be used for different periods of time according to different column-fixing methods. It can be made into a permanent mesh wall or used as a temporary isolation mesh.


Welded mesh fence can be divided into Welded Mesh Fence,High Security Welded Mesh Fence,Welded Wire Mesh Fence,Galvanized Welded Wire Fence

If you are not sure how to determine the column fixing method, you are welcome to consult us at any time.

Dongjie Wire Mesh has a professional technical guidance team that can help you choose the column and Welded Mesh Fence suitable for your use environment.

Mesh Fence 6
Mesh Fence 2
Mesh Fence 4
Mesh Fence 8

FAQ
Q1: Are you a manufacturer or a trader?
A1: We are a professional manufacturer of wire mesh products. We specialize in wire mesh for decades and have accumulated rich experience in this field.

Q2: How to make an inquiry?
A2: You need to provide material, sheet size, wire diameter, hole spacing and quantity for inquiry. Special requirements can also be specified.

Q3: Can you provide free samples?
A3: Yes, we can provide free samples in 20cm-50cm size as well as our catalog. But the courier fee will be on your side. If you place an order, we will refund the courier fee.

Q4: What is your payment term?
A4: In general, our payment term is T/T 30% advance payment, balance 70% against bill of lading copy. We can also discuss other payment terms.

Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the delivery time for all stock materials is 7 days.
Depending on quantity and technology, you need accurate lead times and production schedules for non-stock items.

Welded Mesh Fence,High Security Welded Mesh Fence,Welded Wire Mesh Fence,Galvanized Welded Wire Fence

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewiremesh.com

This entry was posted in on