Valeo, France, exhibited the solenoid valve mechanism "Smart Valve Actuation (SVA)" at the Tokyo Motor Show. Instead of using a cam when opening and closing the valve, it is controlled by an electromagnetic actuator. In addition to optimal control of the valve opening and closing timing and valve opening time according to the number of engine revolutions, it is also easy to achieve cylinder intermittent functions, etc., so that fuel consumption and exhaust gas purification performance can be improved by 20%, and when rotating at low speed The torque is increased by about 15-20%. ;
At present, Valeo is developing two kinds of electromagnetic valves, one is "Full Camless" which can eliminate the suction and exhaust cam at the same time, and the other is "Half Camless" which only saves the suction cam. In addition to the use of two electromagnets used to open and close the valve instead of the omitted cam, and the addition of armatures and sensors and other components, the weight of the double solenoid valve mechanism exhibited this time reached about 1.8kg. In addition, a control unit with a 32-bit processor is required. ;
The company has jointly developed SVA institutions with a number of car manufacturers, and plans to start mass production in 2009.
Used Large Club Lift has the function of lifting, rotating, tilting multiple functions.
Drama Theater Lift Platform is to improve the effect of the recent stage equipment. Also has the self-locking, interlocking, mechanical limit control functions. Then the stage Lift platform is safe and stable and reliable.
Lift Up, Stop and Lower of Revolving Stage Lift Platform could be realized at each control point. The lift platform could stop at the accurate loaction point.
Smooth working condition,high load capacity, safe and reliable. The overload protection devices are
available and meanwhile the hydraulic system has the anti-drop function when any failure happens. Power
Supply of Car Display Stage Lift Table is from local power sources.
Configuration for High Quality Revolving Car Display Stage Lift:
1. Platform Material: rectangular tube + checkered anti-slip plate.
2. Support scissors: high strength Manganese Steel.
3. Hydraulic system: 380V or 220v or as your request.
4. Hydraulic cylinder: sets high precision wear-resisting cylinders with locking device for fall protection.
5. Piston Rod: hard chromium plating surface.
6. High-pressure oil pump: from Italy or Chinese famous brand.
7. Hydraulic pipe: high pressure pipe with double expanded metal protected.
8. Hydraulic oil: summer 46#, winter 32#.
9. Controller: 1 control box below, 1 hand controller above platform.
Application Area:
Hydraulic Stage Lift is widely used in the assembly hall, cinemas, theaters, multifunction hall, studio, culture and sports venues, hotels, and other cultural entertainment places.
If you have any questions, please contact with us directly. Hydraulic Stage Lift are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Hydraulic Stage Lift
Hydraulic Stage Lift,Hydraulic Scissor Lift Stage,Rotating Hydraulic Scissor Stage Lift,Adjustable Hydraulic Stage Lift
Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com