·The end of the "Twelfth Five-Year Plan" in Hebei, eliminating all registered and operated yellow-label vehicles

It was learned from the Transportation Department of Hebei Province that by the end of the “Twelfth Five-Year Plan”, all registered yellow-labeled motor vehicles in the province were eliminated.
According to preliminary statistics, there are currently more than 5,590 yellow-label vehicles in the province's operating vehicles, mainly in the urban bus industry. Relevant cities and municipalities should formulate specific measures for the elimination of yellow-label buses as soon as possible, and strive to purchase a corresponding number of natural gas buses or emission-compliant buses, and complete the task of replacing existing yellow-label buses in urban areas by the end of 2015.
At the same time, encourage the use of low-emission or “zero” emissions of natural gas buses, hybrid vehicles and pure electric buses; encourage the use of natural gas powered vehicles or electric vehicles, hybrid vehicles and other energy-saving environmentally friendly taxis; the average annual load rate Less than 70% of the passenger transport lines above the county level shall not be allowed to add new capacity; for passenger transport lines parallel to high-speed railways and intercity rail transit, in principle, no additional capacity will be approved.

RS30C Rotor Spinning Machine-A new generation of semi-automatic spinning machines with fine quality, high efficiency and wide adaptability of raw material

The new generation of Spinning Machine improves the quality of the obtained yarn and the adaptability of its raw material is wide.

The design of fiber channel is optimized to achieve better evenness and higher strength for the obtained yarn with less defects; especially when the spinning the non-cotton fiber the friction coefficient of which is big, the fiber transfers smoothly and the quality of the obtained yarn is improved;

2  The new carding and inclusions removing system can adapt to worse raw materials to reduce the production cost.

The YOUYI jointing system with excellent jointing quality and ease of operation

The pneumatic controlled semi-automatic jointing system can automatically lift the bobbin in case of yarn breakage;

In the process of jointing, the doffing roller is depressed under the force of cylinder pressure and the yarn cone is put down to ensure the consistency of the jointing operation;

The concept of automatic jointing is introduced and the stepper motor is applied to control the feeding, thus the jointing quality is improved;

When the preparation work for jointing is done, the specially designed yarn breakage sensor would sense the feeding of yarn and automatically start the jointing. C

Lower production cost, higher productivity

1  Max can up to 480 rotors per machine;

When the speed of the rotor reaches 105,000 rpm, the servo would drive the traverse yarn guiding and the yarn guiding speed reaches200m/min;

The whole machine is driven via variable frequency and both sides transmit independently to reduce the assistant production time;

Low operating height and can be equipped with cans up to1200mmhigh.

Machine Parameter:

1,Machine Length : â‰¤62.5m, up to 480 heads, 20 heads in each section, spindle pitch:230mm

2, Yarn Count Range: 6--40Ne

3, Spinning Material : â‰¤60mmnatural and artificial fiber and blended yarn

4,False Twister :R7/R4 smooth metal, ceramic plain and incense-oiled and other specifications 

5,Navel: Ceramic plain, V groove and spiral groove

6,Rotor Speed : 45000-105000 two sides independent transmission, variable frequency adjusted


7,Rotor Rotating Speed Difference Rate: â‰¤3%

8,Rotor Diameter: Ф33 /36 / 42 / 50 /54 / 66 or other models 

9, Carding Roller Speed:6000-11000 two sides independent transmission, variable frequency adjusted

10, Hard Edge Stroke :0~4 Step-less regulation

11, Parallel Bobbin Cop Models: 30°,33°,35°,39°or 42°

12, Can Model (Outside Diameter/Height):16″(Ф400 ), 18″(Ф450),20″(Ф530) /standard height: 1070, 1200 optional

13,Package Model (Diameter): Parallel Bobbin Maximum: Ф300
                                   Conic Bobbin Maximum: Ф270

14,Full Bobbin Yarn Weight: Max 4.5KGS

15, Arm Lifting Device :Standard pneumatic automatic lifting

16, Rotor Cavity Negative Pressure:≥5kpa

17, Suction Fan Displacement: Maximum:7200m3/h , variable frequency adjusted

RIFA major manufacture all kinds rotor spining, OE machine, Twister machines, winding machines, compact conversion, knitting machines and all kinds looms.


       open end spinningrotor gearrotor spinningRS30C rotor spining

 

 

Semi-automatic Rotor Spinning Machine

Semi-Automatic Rotor Spinning Machine,Rotor Spinning Machine,Rotor Spinning Machine For Cotton,Cotton Spinning Machine

RIFA TEXTILE MACHINERY CO.,LTD , http://www.rifatex.com

This entry was posted in on