Regular maintenance of our car can keep it "healthy." After the sun and the rain, summer is just a good time for car care. To care for your car in the summer, please note the following:
1. The exterior of the car maintains strong sunlight in summer, and the temperature is high. If the car is exposed to sunlight for a long time, the car body and paint will be damaged. Acidic substances in the rain will also cause damage to the car's paint surface, and will not be dealt with in time. Over time, the car paint will lose its luster. Into the summer, the first step in maintenance is to polish and wax the car, to restore a new, beautiful appearance for the car.
2. The cooling nets of the cooling tanks are hot and rainy in summer. Not only does the frequency of the air conditioners increase, but many dust, battings, leaves and other impurities with moisture will also accumulate on the tank condensation network. This will have an impact on two aspects: First, it is easy to breed bacteria; second, it affects the cooling function of the water tank and the condenser. To eliminate these effects, it is advisable to go to a car maintenance shop and find a professional to clean it. In order to completely remove bacteria and odors from inside the car, it is best to replace the air conditioning filter in the car at the end of summer to increase the coolness of the air conditioning and improve the comfort of the ride.
3, check the engine compartment of the oil, water, electric engine oil in the engine compartment, including brake oil, booster pump oil, transmission oil and so on. Here, it is necessary to remind owners of vehicles with lower frequency that they should regularly check whether the oils are deteriorating according to the length of time spent on vehicles so that they can be replaced in a timely manner. At the same time, water tanks, wiper, and antifreeze should be checked to prevent deterioration.
4. Chassis derusting and tire inspection Summer car chassis maintenance focuses on both rust removal and tire inspection. On the one hand, after the metal material of the chassis has been exposed to the sun and exposed to rain, it is prone to rust, affecting traffic safety. Therefore, the chassis must be rust-removed and the chassis checked for scratches and screws.
5, warm air line and fan maintenance pay special attention to the windshield under the defrost outlet air is normal, if there is a problem, it is necessary to solve in time, otherwise it will bring unsafe factors to your driving.
6, brake system maintenance should always check whether there is weakening the brake, deviation, whether the brake pedal pedaling force changes, if necessary, clean up the entire braking system of the pipeline part.
7. Battery maintenance In the summer, the electrode connection of the car battery is the most prone to problems. During the inspection, if there is a green oxide at the electrode connection, it must be flushed with boiling water. These green oxides will cause the generator power. Insufficient, so that the battery is in a loss of power state, in serious cases will cause the battery to be scrapped, or can not fight a car.
Specializing in the manufacturing of lost wax investment castings and finished products in carbon steel and alloy steel, our company is a world class manufacturer and supplier of investment castings in China. It consists of 2 major facilities, both Steel Casting foundry and CNC Machining factory which enable us to supply both metal castings and finished products with an annual production capacity of over 20,000 tons, and the products are mainly exported to Europe, America, Japan and other destinations around the world.
Metal Casting,Non Ferrous Casting,Plastic Casting,Ferrous Casting
Baoding Henglian Mechanical Co.,Ltd , http://www.hengliancasting.com