The maintenance of the machine is carried out from time to time. In the use of the jaw crusher , the screws of the internal parts of the machine or the screws of the fixed machine are often loosened due to the great force of the machine. This requires regular reinforcement of the machine's screws.
Second, do not promptly replace the lubricant with the machine. After the machine has been in use for a period of time, the internal lubricant will reduce the lubrication effect, and the debris that falls off during the running of the machine will also increase the wear of the machine. Therefore, when the lubricant has been used for a while, it must be replaced in time. The use of coal and oil in the replacement of the interior completely cleaned up, do not let a little debris left behind. This way the machine is not easy to wear.
Third, the internal temperature of the machine is too high. Jaw crusher generates a lot of heat due to friction during use. If this heat is not released in time, it will damage the machine. For example, the center axis of the machine will be deformed due to high temperature and will be damaged when the stone is broken. Therefore, always pay attention to the internal temperature when using the crusher. If the machine temperature is too high, stop the work in time, and then use it when the temperature is reduced.
Fourth, when added to the feed which is not picked iron block. If the iron is in the raw material, the jaws of the jaw crusher will be destroyed. Causes the machine not to be able to use.
5. Add raw materials unevenly. This will damage the machine due to excessive load when too much material enters the machine.
Small Electric Appliances,Processor Vegetable Chopper,Electric Fryer Small Appliances,Small Home Appliances
Yuyao Hongzhou Plastic Technology Co., Ltd. , https://www.hongzhoumoulds.com