How to start the garbage truck correctly?

The start of the garbage truck is basically the same as that of a normal vehicle. I believe we are all familiar with it. We must insert the key, place it in a spiral, and light up on fire. Is this still necessary for people to teach? Need to know, according to this method in the long run, it will cause difficulties in the start of garbage. It takes a few fires to start.

The correct ignition method for the garbage truck is: insert the key to rotate to ACC stop, wait for 2 to 3 seconds or so, make the main power relay contact firmly contact, let the first part needs to energize the device power; continue to turn the key to ON, and then Stop waiting for 6 to 10 seconds, let the oil pump relay pull, wait for each sensor to adjust the state, turn the key to START until the engine runs continuously and return to ON. However, for temporary or short-term parking, you can start quickly without stopping.

Bucket Handle

Bucket handle is made of high quality galvanized wire.The wire handle has good tensile strength and high corrosion resistance due to the thick zinc coating layer.The cross section of the bucket handle wire is round.The tolerance of the diameter could reach +-0.01mm,the tensile strength could reach above 650n,25-35g zinc coating.Bucket handle wire is a hard or soft galvanized steel wire for the production of bucket and pail handles. You can transform the wire into different handle shapes to fit any type of plastic or metal container. It has a smooth and attractive finish that looks great on store shelves and helps your production process.

Bucket handle is made of high quality galvanized wire.The wire handle has good tensile strength and high corrosion resistance due to the thick zinc coating layer.The cross section of the bucket handle wire is round.The tolerance of the diameter could reach +-0.01mm,the tensile strength could reach above 650n,25-35g zinc coating.Bucket handle wire is a hard or soft galvanized steel wire for the production of bucket and pail handles. You can transform the wire into different handle shapes to fit any type of plastic or metal container. It has a smooth and attractive finish that looks great on store shelves and helps your production process.


Metal Wire Bucket,Metal Handle,Metal Bucket Handle,Bucket Handle Steel Wire

Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com

This entry was posted in on