Electromagnetic flowmeter, sewage flowmeter, corrosive liquid flowmeter selection

Provide various types of flow meters, electromagnetic flow meters, superior performance, integrity business, rest assured choice! All kinds of meter flowmeter, full variety of excellent prices, reliable quality and long life, welcome to buy!

Electromagnetic flowmeter | Guangzhou electromagnetic flowmeter | Guangdong flow meter | flowmeter manufacturers quote | Guangzhou flowmeter manufacturers | Supply - Guangzhou Dichuan Instrument Co., Ltd. hotline: 020-85628522 85550363
About electromagnetic flow meter: electromagnetic flowmeter is the 1960s with the development of electronic technology and the rapid development of new flow measurement instruments. Electromagnetic flowmeters are made according to Faraday's magnetic induction law and are used to measure the volume flow of conductive liquids. Due to its unique advantages, it has been widely used in the measurement of various conductive liquids in industry. For example, measuring various acids, alkalis, salts and other corrosive liquids; various flammable and explosive media; various industrial sewage, pulp, sediment, etc.

Electromagnetic flowmeter applications : pulp flow measurement, juice flow measurement, dirty process fluid measurement , micro flow measurement, cold water flow measurement. Oily wastewater measurement, hot water flow measurement, household heat measurement , building heat measurement, water meter measurement, pump efficiency test, process flow measurement, open channel flow measurement. Demineralized Water Flow Measurement, Large Diameter Sewage Measurement, Power Plant Cooling Water Measurement, Non-full Tube Flow Measurement, Corrosive Flow Measurement, Untreated Sewage Measurement, Tap Water Flow Measurement, High Pressure Natural Gas Metering, Factory Emission Liquid Metering, Non-Contact Flow Measurement . Pump water flow measurement

Features :
1. The electromagnetic flowmeter has a simple and reliable structure, no moving parts, and long working life.
2. No blocking flow blocking parts, no pressure loss and fluid blocking.
3. No mechanical inertia, fast response, good stability, can be applied to automatic detection, adjustment and program control system.
4 has a pipeline, plug-in type easy to install.
5. With integrated and split type for easy selection.
6. The measurement accuracy is not affected by the type of medium to be measured and the physical parameters such as temperature, viscosity, density, and pressure.
7. The use of different combinations of PTFE or rubber lining and Hc , Hb , 316L , Ti and other electrode materials can meet the needs of different media.
8. Using EEPROM memory, measurement and data storage protection is safe and reliable.
9. Various signal transmission methods and power supply methods.
10. High-resolution LCD backlight display.
Technical Parameters:
Instrument accuracy: Pipeline 0.5 , 1.0 ; plug-in level 1.5
Measurement media: Various liquid and liquid-solid two-phase fluids with electrical conductivity greater than 5 μS/cm .
Flow rate range: 0.01 ~ 15m/s
Working pressure: 1.6MPa
Ambient temperature: -40°C to +50°C
Medium temperature: Teflon lining ≤180°C
Rubber lining: ≤65°C
Explosion-proof mark: ExmibdIIBT4
Explosion-proof license number: GYB01349
External magnetic interference: ≤400A/m
Shell protection: Integrated type: IP65 ;
Separate type: Sensor IP68 ( 5 meters underwater, rubber lining only ) Converter IP65
Output signal: 4 to 20mA.DC , load resistance 0 to 750Ω
Communication output: RS485 or CAN bus
Electrical connection: M20×1.5 female thread, φ10 cable hole
Supply voltage: 90 to 220VAC , 24±10%V.DC
High power consumption: ≤10VA