1. Dehumidification micro-heating system: The use of environmentally friendly compressor-free desiccant dryer, micro-computer program controlled suction and drainage wet cycle, Japan PTC ceramic moisture absorption disc (renewable high-efficiency physical adsorption material) strong dehumidification, filtration, dehumidification stability, micro-heating, low temperature inside and outside the cabinet Poor, to prevent electric shocks and flashover accidents caused by moisture and condensation of safety tools.
2. Microcomputer control: Microcomputer LED display, automatic temperature and humidity display control, timing control, can simultaneously collect, measure the cabinet temperature, cabinet humidity, outside the cabinet temperature, humidity outside the cabinet and other data, and displayed on the controller panel.
3. The microcomputer controls the temperature and humidity in the cabinet, and can quickly reduce the relative humidity (up to 45%) in a short time (20 minutes), which is better than the "basic technical requirements and design guidelines for live working tools GB/T18037-2000". The humidity is not required. Greater than 60% of the regulations.
4. It has safety protection function: Over-temperature over-limit alarm and independent over-temperature power-off function ensure the temperature does not exceed the standard.
5. With the communication function, the cabinet temperature and humidity information is transmitted to the management information system through the communication interface, and the data storage and analysis are implemented.
6. Wide working environment range: -20°C~45°C can operate normally.
7. Dehumidification capacity: 10 sheng/day.
8. Power: 220V/50HZ, rated power: 550W (at high speed).
9. Drainage: The hose drains continuously.
10. Applicable area: 5m2-30m2.
In the process of using the safety tool cabinet to avoid the serious consequences of casualties, we must pay attention to the following matters:
1. Do not open 2 or 3 drawers at the same time when the drawer is full, otherwise the cabinet will fall;
2. Do not pull on the back of the tool cabinet when you are working. Please keep the front cart stable.
3. Do not stand on the top of the tool cabinet or the drawer during work to avoid unnecessary accidents;
4. When placing an object, the weight of the object should not exceed the maximum weight capacity of the drawer;
5. The tool cabinet must be stepped on the brake when it is in a stable position. When you move the tool cabinet, please lock the drawer in advance to prevent the drawer from slipping out accidentally.
6. Wear gloves when working to avoid being scratched by sharp bolts or rough tools;
7. To use the tool cabinet, use a tool cabinet with good quality. Do not use tool cabinets that are not safe. Huizhou industrial equipment and tool cabinets provide protection for your safety.
8. At the same time, the safety tool cabinet should be equipped with a leakage protector to protect personal safety.
The new type of supporting products for safety tools and tools - ordinary intelligent safety tool cabinet series that integrates moisture proof, dehumidification, dust proof, loss prevention, and neat appearance. Ordinary intelligent security tool cabinet shell using high-quality cold plate, the use of artistic electrostatic spraying, door selection of high-strength tempered glass, the appearance of generous, beautiful.
2. Microcomputer control: Microcomputer LED display, automatic temperature and humidity display control, timing control, can simultaneously collect, measure the cabinet temperature, cabinet humidity, outside the cabinet temperature, humidity outside the cabinet and other data, and displayed on the controller panel.
3. The microcomputer controls the temperature and humidity in the cabinet, and can quickly reduce the relative humidity (up to 45%) in a short time (20 minutes), which is better than the "basic technical requirements and design guidelines for live working tools GB/T18037-2000". The humidity is not required. Greater than 60% of the regulations.
4. It has safety protection function: Over-temperature over-limit alarm and independent over-temperature power-off function ensure the temperature does not exceed the standard.
5. With the communication function, the cabinet temperature and humidity information is transmitted to the management information system through the communication interface, and the data storage and analysis are implemented.
6. Wide working environment range: -20°C~45°C can operate normally.
7. Dehumidification capacity: 10 sheng/day.
8. Power: 220V/50HZ, rated power: 550W (at high speed).
9. Drainage: The hose drains continuously.
10. Applicable area: 5m2-30m2.
In the process of using the safety tool cabinet to avoid the serious consequences of casualties, we must pay attention to the following matters:
1. Do not open 2 or 3 drawers at the same time when the drawer is full, otherwise the cabinet will fall;
2. Do not pull on the back of the tool cabinet when you are working. Please keep the front cart stable.
3. Do not stand on the top of the tool cabinet or the drawer during work to avoid unnecessary accidents;
4. When placing an object, the weight of the object should not exceed the maximum weight capacity of the drawer;
5. The tool cabinet must be stepped on the brake when it is in a stable position. When you move the tool cabinet, please lock the drawer in advance to prevent the drawer from slipping out accidentally.
6. Wear gloves when working to avoid being scratched by sharp bolts or rough tools;
7. To use the tool cabinet, use a tool cabinet with good quality. Do not use tool cabinets that are not safe. Huizhou industrial equipment and tool cabinets provide protection for your safety.
8. At the same time, the safety tool cabinet should be equipped with a leakage protector to protect personal safety.
The new type of supporting products for safety tools and tools - ordinary intelligent safety tool cabinet series that integrates moisture proof, dehumidification, dust proof, loss prevention, and neat appearance. Ordinary intelligent security tool cabinet shell using high-quality cold plate, the use of artistic electrostatic spraying, door selection of high-strength tempered glass, the appearance of generous, beautiful.
Planetary Mixer,Industrial Planetary Mixer,Planetary Mixer Machine,Planet Mixer
Fujian Dika Machinery Co.,Ltd , https://www.fjdika.com