1, a detailed examination of the various components, shall comply with the appropriate standards.
2, both ends of the gear and shaft centerline verticality, the parallelism of both ends of the gear should be qualified; gear meshing good.
3, the shaft diameter should meet the technical requirements, coaxiality of the sleeve or bearing and shaft diameter is qualified.
4, gear end gap to adjust properly.
5, tighten the face bolts, the force should be symmetrical; edge tight disc rotor rotor. If you encounter jam, loose bolts should be re-tight.
6, plus packing pressing gland, the need to edge tightly disc rotor, can not be too tight.
Modular Homes as a kind of highly Prefabricated Homes, it is a high performance and advanced building, combine with high prefab rate, it can significantly shorten the construction period and improve project quality, and on-site handing will be easier and faster, so it can cut the demands on labor's skill, quantity and save the time, which naturally leads to a distinct labor cost saving.
Compared with traditonal building systems, they have less damand on foundation, and materials are recyclable and energy efficient, making good contribution to protect the natural environment.
Modular Homes
Excel Modular Homes,Modular Homes'Quality,Modular Homes 2 Story,Fast-Built Houses,Tiny House,Green House,Modular homes,Prefabricated Homes
Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com