Recently, Xiao Bian learned from special vehicles for Cheng Li that the new refueling vehicles produced by Cheng Li's factory are now undergoing promotional activities. These tankers are parked outside the production workshop. They can be read at any time to understand that they can be purchased. The following Xiaobian is carrying Let's take a look at the promotions in the end.
Let's take a look at the refueling car modified by Dongfeng Kaipute chassis - Cheng Liwei brand CLW5070GJYD4 refueling vehicle. The D28D10-4DA engine equipped with Dongfeng light hair meets the national IV emission standard. This engine is relatively durable, and the technology is mature and maintenance cost is also low. Matched with the engine is a 5-speed manual transmission. The front axle has a front axle of 1.8 tons and a rear axle of 3.5 tons, and is equipped with a 7.00R16 steel wire tire. The load capacity is trustworthy. The steering wheel assists with hydraulic assistance, effectively reducing the burden on the driver’s hands and making steering wheel easier.
In the brakes, equipped with a gas brake, but the most worthy of recognition is that the entire system comes standard with ABS brake force distribution system, can provide a stable parking attitude for the vehicle when braking, do not worry about overturning conditions when the emergency brake, to the tanker The provision of effective safety guarantees is commendable, but it can also limit the speed of the vehicle. Speeding a tanker is a very dangerous matter and cannot be ignored.
Capacity 6.35 cubic side hanging tanker:
High version: single warehouse, Boshan oil pump, with a full set of European standard system (European standard tank, subsea valve, oil and gas recovery, anti-overflow detection system, under the loading port), Zhengxing large flow tanker, bold 15 meters Automatic return oil gun, a tool box, movable tread plate walkway, all box locks are European style, with movable folding guardrail, two fire extinguishers, with electrostatic reel, and the rest are all standard in the yard. Then this system is the same with the high-level version of Dolika. The difference is in the chassis engine. Thanks to Dongfeng's own engine, cost control is better.
Standard version: single warehouse, Boshan oil pump, standard (European standard tank mouth, subsea valve), Burleigh large flow tanker, bold 15 meter automatic return oil gun, a tool box, movable tread plate walkway All box locks are European style, with movable folding guardrail, two fire extinguishers, with electrostatic reel, the rest are standard on the floor.
Volume 5.3 cubic built-in tanker:
This refueling car will not have a high distribution and standard version, because it is almost sold out, leaving only one, it seems this is still relatively hot, the specific configuration is as follows: single warehouse, Boshan oil pump, standard (European standard tank mouth, subsea valve), Burleigh large flow tanker, bold 15 meter automatic return oil gun, a tool box, movable tread plate walkway, all box locks are European style, with movable folding guardrail , Two fire extinguishers, with electrostatic reel, the rest are standard on-site.
Summary: The above models are well-sold models, especially the last one. They are all transported by gasoline. They have obtained fuel announcements and environmental announcements. The procedures are complete. After payment, they can be withdrawn. No waiting, and the price is still such a discount. What are the bosses waiting for? Let’s have a look.
Information
For more information, please click: http://
Attachment: Dongfeng Doolika Refueling Truck Loss Sale! Do not miss passing through
Http://news.chinacar.com.cn/newsview112500.html
Nickel Based Laser Cladding Powder
Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.
Cobalt based Laser Cladding Powder
Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.
Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.
Iron based Laser Cladding Powder
The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.
WC blended Laser Cladding Powder
Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.
Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com