Introduction:
1. Using magnetic coupling drive without leakage, 316 L stainless steel shell, PEEK materials gear, PTFE sealing materials, use brushless DC motor combination with smaller size, with built-in limit pressure valve, the flow rate can be realized without steps.
2. Pump can be used in the -0.1 Map20Map closed systems, the rated output pressure is 0.3 Mpa (medium: Water), the maximum output pressure is 1.4 Mpa, output flow rate with 50~3500 ml / min.
3. Widely used in hemodialysis machines, printing machine, pictorial machine, medicine, chemicals, water treatment, printing, cleaning, packaging, filling machines, food processing, and other areas of liquid delivery, particularly suitable for printing machine, pictorial machine, barcode machine.
Normal Parameters:
1. Altitude: ≤ 2500 M
2. Humidity environment: ≤ 85%
3. Fluid viscosity: 0 ~ 3000 CPS
4. Ambient temperature: -10 ~ 50 ° C
5. Fluid temperature: -10 ° C≤ T ≤ 100 ° C (except for the freezing)
6. Working way: Continuous working
7. Apply the media of: Acid and alkali, salt, organic solvents, oils.
8. Lifetime above 8000hours
Note: MG204XK "04" means the gear of the pump with the height of 4mm, "09" means 9mm, "13" means 13mm
OEM and ODM service are avaiable under your request.
The specifications only for reference, for details, please contact with us!
| Model | Max Head Pressure (Bar) | Max Flow scope (ml/Min) | Power (W) | Voltage (V) | Inlet/Outlet Diameter |   ml/rpm                          (reference 3000RPM) |
| MG204XK/DC24W | 7 | 80-1000 | 60W | DC24 | G1/8" | 0.27 |
| MG209XK/DC24W | 7 | 150-2500 | 60W | DC24 | G1/8" | 0.65 |
| MG213XK/DC24W | 7 | 300-3500 | 60W | DC24 | G1/8" | 0.75 |
| Note:Â Â 1. "04" means the gear with the height of 4mm, "09" means 9mm, "13" means 13mm . | ||||||
| 2. if needed : "L" limited pressure valve, " R " non return valve , please specially specify in advance. | ||||||
| 3. "XK" PEEK gear, "YT" Alloy gear, if the liquid contain rigid particles,such as pigment ink,recommend use YT gear. | ||||||
Shijiazhuang Naipu Pump Co.,ltd is a professional manufacturer of all type of horizontal centrifugal slurry pumps. Our horziontal centrifugal slurry pumps including:NP-AH,NP-AHR,NP-HH,NP-M which are designed for handing highly abrasive,high density slurries in the metallurgical,mining,coal,power, building material and other industrial department,etc.The pumps of this type also maybe installed in multistage series.
NP-G,NP-GH gravel and sand slurry pumps are designed for continously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. they are suitable for deliverying slurries in mining.Explosive-sludge in metal melting,dredging in dredger and course of rivers,and other fileds.Type NP-GH pumps are of high head ones.
NP-Lseries pump are suitable for delivering lower abrasive,lower density slurries for metallurgical,mining,and building material departments.The shaft seal adopt gland seal and centrifugal seal.
And Naipu also produce many other types of Horizontal slurry pumps,such as NP-M,NP-ZG,NP-WS Dredging Pump and NP-Zjw Feeding Pumps,etc.
AH Horizontal Slurry Pumps,Horizontal Mining Slurry Pump,Single-Stage Horizontal Slurry Pump
Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com