In the general machinery industry, state-owned enterprises are well-deserved main forces. In 2005, among the top 10 companies in the total industrial output value of key enterprises in the general machinery manufacturing industry, 6 were state-owned enterprises. It is under the guidance of these companies that the entire general machinery industry has carried out technological innovation and independent research and development on the basis of digestion and introduction of technologies, and has made gratifying breakthroughs in the development of major technological equipment.
Shengu completed the industrial output value of 1.78 billion yuan in 2005, an increase of 150.6%. Among them, major technical equipment projects accounted for 70% of the total output value. A total of 435 new products (including high-tech products) were developed and researched throughout the year, and the output value of new products was 80.9%. The 3MCL527-1 centrifugal compressor developed by the company won the second prize of China Machinery Industry Science and Technology Award.
Shaanxi Drum completed a total industrial output value of 2.5 billion yuan in 2005, a year-on-year increase of 25%. Shaanxi drum brand industrial process energy recovery residual pressure power generation equipment and axial compressor were respectively awarded the China Famous Brand. The company's self-developed AV100-17 axial compressor project was awarded the 2005 China Machinery Industry Science and Technology Award.
Hangzhou Oxygen Co., Ltd. and Shandong Hualu Hengsheng Chemical Co., Ltd. signed the seventh 50,000 m3/hour air separation equipment supply contract. According to statistics, last year, Hangyang Oxygen completed a total industrial output value of 2.04 billion yuan, and the new product rate reached more than 50%. The company developed a large-scale ethylene unit cold box domestic research projects, was named 2005 China Machinery Industry Science and Technology Award. Hangzhou Oxygen Group will go through the relocation of enterprises, expand investment financing channels, enter the gas industry, and extend the main products. It is expected that the output value will reach more than 4 billion yuan after relocation.
Wuxi Compressor Co., Ltd. has successfully developed the domestic first screw-type natural gas compressor, and for the first time enters the natural gas power generation matching market, replacing imports. At the same time, the helium compressor developed by the company contributed to the "Shenzhou VI".
The large-scale series desulfurization pumps developed by Shijiazhuang Pump Industry Group Co., Ltd. have increasingly perfected their specifications and models, ensuring the technological advantages and market advantages of the domestic equipment in the desulfurization pump market, enabling the company to gradually embark on the road to large-scale products.
Dalian Da Nai Pump Co., Ltd. has successively cooperated with Germany and Switzerland. This year, the company has also established a joint venture with the United States Moino Corporation to establish a Dalian Moyin Screw Pump Co., Ltd. Through joint ventures and cooperation, Dalian Dame not only attracted foreign capital, but also introduced advanced foreign pump manufacturing technology, which increased the market share of the product.
In addition, Shenyang Pump Co., Ltd. has developed 8×1014-7HDB electric feed pumps, 14×14×16A-5HDB pneumatic feed pumps, YOTF450/E couplers, YOCQ422/E couplers, and 4DGT-8C boiler feed pumps; Cheng Pump Group developed a low-noise, non-negative pressure centrifugal pump; Zhejiang Fengqiu Group developed cutting submersible sewage pump and spacer-type submersible electric pump; Benxi Pump Factory developed the internal spiral sewage sewage pump; Shandong double wheel The group developed SSH and SSL single-stage double-suction mid-disc centrifugal pumps; Changsha Valve Factory successfully manufactured the DN4800mm hydraulic control metal hard-sealed butterfly valve with the largest diameter in the country; Zigong High-Pressure Valve Co., Ltd. developed a fully-welded forged steel pipe line. Ball valve and forged steel fixed ball valve; Anshan Hengtong Valve Co., Ltd. developed and developed a dedicated converter gas recovery valve group; Guangdong Pearl Group Co., Ltd. developed a swing ball guide rod type high temperature and high pressure ball valve; Xuanda Industrial Group Co., Ltd. developed XD -2 high-temperature alloy valves, these product performance indicators have reached the international advanced level of similar products, filling the domestic blank.
Now, technological innovation is not only limited to product development, it also enables companies to create new business channels. Shaanxi Drum pioneered the development of a complete after-sales service system "Shaanxi Drum Rotary Machinery Remote Online Monitoring and Fault Diagnosis Center" in China, and constructed a customer remote service platform. Now, the center has realized real-time remote on-line monitoring of 13 sets of 13 large-scale rotating units produced by Shaanxi Drum. There are 12 sets of 12 units to be installed. In addition to monitoring the products produced by the company, the center also provides remote monitoring services to 156 sets of units produced by other manufacturers. Technological innovation not only enabled Shaanxi Drum to acquire new products, but also upgraded its service model and expanded its profitability space.
Shengu completed the industrial output value of 1.78 billion yuan in 2005, an increase of 150.6%. Among them, major technical equipment projects accounted for 70% of the total output value. A total of 435 new products (including high-tech products) were developed and researched throughout the year, and the output value of new products was 80.9%. The 3MCL527-1 centrifugal compressor developed by the company won the second prize of China Machinery Industry Science and Technology Award.
Shaanxi Drum completed a total industrial output value of 2.5 billion yuan in 2005, a year-on-year increase of 25%. Shaanxi drum brand industrial process energy recovery residual pressure power generation equipment and axial compressor were respectively awarded the China Famous Brand. The company's self-developed AV100-17 axial compressor project was awarded the 2005 China Machinery Industry Science and Technology Award.
Hangzhou Oxygen Co., Ltd. and Shandong Hualu Hengsheng Chemical Co., Ltd. signed the seventh 50,000 m3/hour air separation equipment supply contract. According to statistics, last year, Hangyang Oxygen completed a total industrial output value of 2.04 billion yuan, and the new product rate reached more than 50%. The company developed a large-scale ethylene unit cold box domestic research projects, was named 2005 China Machinery Industry Science and Technology Award. Hangzhou Oxygen Group will go through the relocation of enterprises, expand investment financing channels, enter the gas industry, and extend the main products. It is expected that the output value will reach more than 4 billion yuan after relocation.
Wuxi Compressor Co., Ltd. has successfully developed the domestic first screw-type natural gas compressor, and for the first time enters the natural gas power generation matching market, replacing imports. At the same time, the helium compressor developed by the company contributed to the "Shenzhou VI".
The large-scale series desulfurization pumps developed by Shijiazhuang Pump Industry Group Co., Ltd. have increasingly perfected their specifications and models, ensuring the technological advantages and market advantages of the domestic equipment in the desulfurization pump market, enabling the company to gradually embark on the road to large-scale products.
Dalian Da Nai Pump Co., Ltd. has successively cooperated with Germany and Switzerland. This year, the company has also established a joint venture with the United States Moino Corporation to establish a Dalian Moyin Screw Pump Co., Ltd. Through joint ventures and cooperation, Dalian Dame not only attracted foreign capital, but also introduced advanced foreign pump manufacturing technology, which increased the market share of the product.
In addition, Shenyang Pump Co., Ltd. has developed 8×1014-7HDB electric feed pumps, 14×14×16A-5HDB pneumatic feed pumps, YOTF450/E couplers, YOCQ422/E couplers, and 4DGT-8C boiler feed pumps; Cheng Pump Group developed a low-noise, non-negative pressure centrifugal pump; Zhejiang Fengqiu Group developed cutting submersible sewage pump and spacer-type submersible electric pump; Benxi Pump Factory developed the internal spiral sewage sewage pump; Shandong double wheel The group developed SSH and SSL single-stage double-suction mid-disc centrifugal pumps; Changsha Valve Factory successfully manufactured the DN4800mm hydraulic control metal hard-sealed butterfly valve with the largest diameter in the country; Zigong High-Pressure Valve Co., Ltd. developed a fully-welded forged steel pipe line. Ball valve and forged steel fixed ball valve; Anshan Hengtong Valve Co., Ltd. developed and developed a dedicated converter gas recovery valve group; Guangdong Pearl Group Co., Ltd. developed a swing ball guide rod type high temperature and high pressure ball valve; Xuanda Industrial Group Co., Ltd. developed XD -2 high-temperature alloy valves, these product performance indicators have reached the international advanced level of similar products, filling the domestic blank.
Now, technological innovation is not only limited to product development, it also enables companies to create new business channels. Shaanxi Drum pioneered the development of a complete after-sales service system "Shaanxi Drum Rotary Machinery Remote Online Monitoring and Fault Diagnosis Center" in China, and constructed a customer remote service platform. Now, the center has realized real-time remote on-line monitoring of 13 sets of 13 large-scale rotating units produced by Shaanxi Drum. There are 12 sets of 12 units to be installed. In addition to monitoring the products produced by the company, the center also provides remote monitoring services to 156 sets of units produced by other manufacturers. Technological innovation not only enabled Shaanxi Drum to acquire new products, but also upgraded its service model and expanded its profitability space.
Hydraulic Aluminum Metal Baler used to crush, cut and bale a wide range of scrap metal. They could deal efficiently and quickly with metals scraps, whether it`s something as small as Cans, Aluminium and steel turnings and Wire scrap, or as large and robust as steel sheet, washing machines, other white goods and whole vehicles. Choose a hydraulic metal baler metal benefit from a reliable and fit-for-purpose solution for your recycling needs.
Aluminum Shavings Baler, Aluminum Turnings Baler, Aluminium Profile Baler, Aluminum Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycling.com