- Model NO.: Z673TC
- Seat: Structural Ceramic
- Actuator: Electric
- Trademark: YFM
- Specification: CE, SGS, TS
- HS Code: 8481804090
- Body Materials: Wcb+Ceramic
- Pressure: Pn16
- Diameter: Dn50~300
- Transport Package: Plywood Case
- Origin: Wenzhou, China
Pneumatic Ceramic Knife Gate Valve for Ash, Slurry, Acid. Anti-corosion and wear-resisting,DN50~300
Product Description:
Ceramic knife gate Valve is suitable for corrosive medium with high hardness of particles (such as slag water), or soft particles in pipeline. The products are widely used in ash, sludge, coal slurry, pulp, sewage and other solid, especially for stone coal system for thermal power plant.
 Disc and seat sealing surface adpot an advanced ceramics materials technologies for abrasion resistance, corrosion resistance, high temperature resistance. Therefore, this valve has a very high abrasion resistance, corrosion resistance, and good insulation, low thermal expansion.
This valve outlet is full circulation without blocking, good abrasion resistance and sealing performance. Opening-load is low, and there's less ash jam phenomenon.
This valve has ductile structural ceramic sealing, high mechanical strength, good abrasion resistance, long life durability. The structure is compact and can be installed at any angle.
 Norminal pressure: PN10~PN25.Â
Applicable temperature:≤250ºC.Â
Actuator Pressure: 0.6~0.8MPa.Â
 It can be designed according to customer's requirement.
Material Specification:
No. | Name | Material | No. | Name | Material |
1 | Body | WCB /CF8 | 7 | Nut | A194-2H/B8 |
2 | Seat | Structural ceramic | 8 | Packing Gland | WCB/CF8 |
3 | Plate | 301/304 | 9 | Cylinder bracket | Q235/SS304 |
4 | Ceramic seal seat | Structural ceramic | 10 | Stem | 2Cr13/SS304 |
5 | Packing | PTFE/Flexible graphite | 11 | cylinder connecting plate | Q235/SS304 |
6 | Stud | A193 B7/B8 | 12 | Pneumatic actuator | Components |
Main Dimension (GB/T 9113):
DN | L | PN10(1.0MPa) | PN16(1.6MPa) | ||||
D | D1 | N-M | D | D1 | N-M | ||
50 | 43 | 165 | 125 | 4-M16 | 165 | 125 | 4-M16 |
65 | 46 | 185 | 145 | 4-M16 | 185 | 145 | 8-M16 |
80 | 46 | 200 | 160 | 8-M16 | 200 | 160 | 8-M16 |
100 | 52 | 220 | 180 | 8-M16 | 220 | 180 | 8-M16 |
125 | 56 | 250 | 210 | 8-M16 | 250 | 210 | 8-M16 |
150 | 56 | 285 | 240 | 8-M20 | 285 | 240 | 8-M20 |
200 | 60 | 340 | 295 | 8-M20 | 340 | 295 | 12-M20 |
250 | 68 | 395 | 350 | 12-M20 | 405 | 355 | 12-M24 |
300 | 78 | 445 | 400 | 12-M20 | 460 | 410 | 12-M24 |
350 | 78 | 505 | 460 | 16-M20 | 520 | 470 | 16-M24 |
400 | 102 | 565 | 515 | 16-M24 | 580 | 525 | 16-M27 |
450 | 114 | 615 | 565 | 20-M24 | 640 | 585 | 20-M27 |
500 | 127 | 670 | 620 | 20-M24 | 715 | 650 | 20-M30 |
600 | 154 | 780 | 725 | 20-M27 | 840 | 770 | 24-M33 |
Note: more size, please contact us.
Â
Aluminum Plate Separator plate separator Inclined Plate Separator Aluminum Composite Panel Production.
The heating steam let the aluminum plate one side end opening,then
with the pressure rollers stripping aluminum skin.
aluminium composite panel separator
The heating steam let the aluminum plate one side end opening,
then with the pressure rollers stripping aluminum skin.
Specification:
1).Separator:1set,3KW,Measurement:L1100*W1100*H850(MM),Weight:400kgs.
2).Opening machine,1set,1.5KW,Measurement:L1050*W500*H1000(MM),Weight:120kgs.
3).Steam boiler,1set,12KW,Measurement:L700*W520*H1550(MM),Weight:160kgs.
Picking:In 3 plywood cases,1.8CBM,680KGS.
Capacity:3000kgs aluminum plate separating,8 hours working time.
Foot switch operation is adopted to guarantee the safe operation of operator.
Aluminium Composite Panel Separator
Aluminum Plate Separator,Aluminium Composite Panel Separator,Inclined Plate Separator,Aluminum Composite Panel Production
TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com