At 11pm on the 15th, a grain bank in Changling Town, Shuangyang District, suddenly caught fire. In the evening when the wind was high, the fire quickly spread through the wind. Peng: If we do not save in time, the grain in the grain store can all be burned.
After receiving the alarm, the Shuangyang Squadron of the Municipal Public Security Fire Brigade dispatched a water tanker fire truck, a ladder fire truck and ten firefighters to the scene. After investigation, the firefighters found that the starting point of fire was located on the top floor of the drying tower of the grain warehouse. The drying tower had 7 floors and was about 28 meters high. There were iron plates around and it was completely closed. There is an external staircase on the outside of the drying tower. The stairs are narrow and only allow one person to pass. Due to limited on-site space, Yunti fire trucks can not play a role. Firefighters can only approach the fire point through the climbing stairs of the drying tower. The difficulty of rescue is not small. Jia Weiming, deputy squadron leader of the Shuangyang Squadron of the Municipal Public Security Fire Fighting Brigade, said that due to the darkness at the time and the poor visibility, it was very difficult to work at high altitude. At that time, because of the wind on the top floor, the external staircase had been a slight shake, which caused great relief for our rescue workers. difficult.
Time passed in one minute and one second. A fireman successfully approached the fire point through an external staircase under the cover of his teammate's water gun. During the climbing process, he succeeded in laying water hooks around the drying tower. The water supply ensures that the high-pressure water gun is focused on the fire point. Jia Weiming said that in about two-thirds of the external stairs, the use of water hose hook vertical laying water, in seven or eight layers, along the stairs laying water.
At the same time, firefighters left on the ground used high-pressure water guns to spray around the grain storage to prevent the spread of fire. After more than three hours of hard work, the fire was successfully extinguished.
Laboratory Common Consumables Plastic Mould
Laboratory Common consumables refers to basically Liquid-separating pipe, Disposable test tube, Screw Cap Tubes and Caps with "O" Rings, PFA volumetric flask,and High temperature and high pressure disinfection basket, high temperature and high pressure tray and Laboratory Plastic Petri Dish Sterile Dish Products.
Laboratory Common Consumables Plastic Mould,Laboratory Plastic Ware,PE Disposable Plastic Testing Tube,Laboratory Plastic Disinfection Basket
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com