China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine

Model NO.: MTM85
Condition: New
Trademark: DEXU
Transport Package: Container Pack
Specification: 5.3X4.1X5.2m
Origin: China
HS Code: 8474202000
MTM Raymond Mill
Principle
Large bulk materials crushed by jaw crusher to the needed size are fed into storage hopper by mine hoist and then fed into grinding chamber of main engine uniformly, quantitatively and continuously by electromagnetic vibrating feeder for grinding.
Grinded materials are blown into separator by blower for classification. With the function of impellers in the separator, materials without meeting the requirements of the fineness are fallen into grinding chamber for grinding again; materials meeting the requirements of the fineness are blown into cyclone powder collector with airflow through pipelines for separation and collection. Powder from discharging device is the finished product.Separated airflow is back to blower through return duct on the top of the cyclone powder collector.
Features
Force produced from milling roller connected by pull rod and high pressure spring can avoid damages caused by bulk materials to the equipment. Resilient coupling between main engine and the separator can reduce vibration and noise and improve service life of the equipment.
Because of connecting crushing, drying, grinding, classifying and transmission together with simple system and
compact layout, it covers about 50% of the area of the ball mill systemand can be outdoor arrangement, which can reduce the investment cost a lot.
Milling roller devices adopt superimposed multistage sealwith excellent seal performance.
Unique air circulation system with advanced dust remover carries the environmental protection concept through to the end.
Impeller devices withhigh density and high precision increase more than 50% of finished product yield under the same power.Efficient and energy-saving centrifugal induced draft fansimprove the efficiency of induced draft fans greatly.
Convenient impeller adjusting devices improve the precision of the finished product.
Application
Feed Size: 25-35mm. Production Capacity: 3-22T/h. Mainly used for powder processing of materials in such industries as construction, chemical, metallurgy, mine, thermal power and coal. All kinds of non-flammable and non-explosive materials with the Mohs hardness of no more than 9.3 and humidity of below 6%, such as cement (raw materials and clinker), coal, talc, feldspar, quartz, slag, mica, calcite, limestone, barite, potassium sulfate,and bentonite.


China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine

Technical Parameters
Model Max. Feed Size (mm) Finished Product Size (mm) ProductionCapacity (t/h) Rotating Speed of Main Motor (r/min) Main Motor Power (kw) Milling Ring Diameter (mm) Milling Ring
Height (mm)
Milling
Roller
Diameter
(mm)
Milling
Roller
Height
(mm)
Milling
Roller
Qty.
Overall
Dimension(m)
MTM75 <15 0.613-0.033 1-3 160 18.5 InnerDiameter 780 150 260 150 3 4.3×3.5×5.1
MTM85 <20 0.613-0.033 1.2-4.6 150 22 Inner Diameter 830 140 270 140 3 5.3×4.1×5.2
MTM100 <25 0.613-0.033 2.1-5.6 130 37 Inner Diameter 950 170 310 170 4 7.1×5.9×7.9
MTM130 <30 0.613-0.033 3-9.5 103 75 Inner Diameter 1280 210 410 210 5 7.85×8×9.7
MTM160 <35 1.6-0.045 5-22 82 132 Inner Diameter 1600 270 440 270 6 12.55×5.7×8.3

Company information:
 
We are QINGDAO DEXU MACHINERY CO., LTD.  Located in the machinery manufacture base of QINGDAO City,we have more than 20 years experience of R&D and sales, pass of ISO 9000 managment system & CE quality certification. As one of the leading machinery manufacturers such as:Mining machine( which including the crusher machine,screen machine and Milling machine), Shot/Sand blasting machine(polish the steel surface rust, strength the steel qulity suit for steel plate, road surface, H beam, outer/inside pipe, oil pipeline casting etc),Also every year we are developing new machines per the market request.
China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine


Factory Ability:
.Clients Consulting Mineral Processing
.Mineral Processing Test
.Mine Design
.Installation & Commissioning
 China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine
China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine
China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine
China Energy Saving Raymond Mill, Low Cost Raymond Milling Machine

FAQ
1. Are you factory or trade company? 
We are manufacturer, we also supply trade service. 
2. Will you provide some wearing parts of the machines? 
Yes, of course. We ship them with machine, spare parts in wood case. 
3. How is the quality of your products? 
We have been approved of ISO, CE and always produce our products strictly according to national and intertnational standards. We do strict inspection in every production stage, all the machines we sell are under warranty. 
4. What about your price? 
We always supply our products with low price, because we believe this is the way to build long-term business and earn good reputation. 
5. What payments term do you accept? 
We accept L/C, T/T and other ways like D/A and D/P etc, T/T goes with 30% advanced payment after signing contract or order confirmation. 
6. What about the order lead time? 
We have two factories and big productivity, the order lead time is only 15-25 days. 

         We promiss to all of our customers:
 
                            Same price ,with best quality,
                      Same quality,with best price.

 

Education Microscope

LCD Digital Microscope Co., Ltd. , http://www.bjusj.com

This entry was posted in on