1. Has strong penetration, emulsify decomposition,
2.Can quickly remove the dirt, dust, grease in the engine surface.
3.Can also be used for removing generator, industrial machinery and other objects.
Â
Direction:
1. Stop the engine to keep it in nomal temperature;
2. Shell well before spray;
3. Spray on the surface of the engine, wait for several minutes, then wipe with brush.
Â
Cautions:
1. Keep away from Children;
2.Operate in ventilated place;
3. Store the product in the place under 40 centigrade;
4. Don't put it in the car and keep away from heat and fire.
Packaging & Shipping
Product Name | Engine Degreaser Cleaner |
Item No. | G1009 |
Volume | 650ml |
Packaging | 24pcs/carton |
Shipping | 850 cartons/20FCL, 1900 cartons/40HQ |
Â
Our Services
 1. OEM & ODM is offered;
2. Private label design;
3. Provide free samples;
4. Manufacturing according to customer's sample&specification.Â
Â
Company Information
Guangzhou GL Industry Co., Ltd. was founded in 2001. It is a manufacturer specialized in car care products with more than 15 years experience, holding the brand GL.
Our factory is located Baiyun distirct,Guangzhou. It is near Baiyun Internationl Airport and just need a half hours. Welcome to visit our factory!
We own professional technical team and strict production requirements to ensure standards
high-quality products.
FAQ
Â
Q: Are you manufacturer or trading company?
A: We are car care products manufacturer with 10 years experience, and specialize in producing lubricants, refrigerant gases, car clean and polish sprays, and other maintenance products!
             Â
Q: Where is your factory?
A: Our factory is located in Longteng Industrial Part, Longgui Town, Baiyun District of Guangzhou, China. Half hour from Baiyun Airport. If you want to visit us, there are following ways:
1. We will go to pick you up in the airport or your hotel in Guangzhou.
2. You can come by taxi.
3. Come by metro. Please take line 3 to Longgui Station, then exit from gate B2, then we go to B2 to pick you up.
Â
Q: Can you make my own brand and design? Is there any extra charge?
A: Yes, OEM and ODM is available. We can make customers' own brands and design without any extra charge. You can send us the designs you have created in CDR or AI or PDF format. Or tell us your idea, then our designer will figure it out.
Â
Q: What's the MOQ (minimum order quantity)?
A: Our own GL brand and package has no MOQ;
  Private brand and design is 5000pcs for each item.
  Â
Q: Is it possible to get free samples? How can we get it?
A: Yes, samples are free within 5pcs. Samples will be sent by courier through special agents in unregular way. Because they are dangerous goods, and there is no any courier can accept them normally. But new customers need to pay for the courier cost. We will surely deduct the cost from the amount when customers place orders. It's better to send us the cost by Western Union. It's safe, fast, and has small extra handling charge. After receiving the cost, samples will be sent out immediately by TNT, DHL or EMS. It will take about 5-7 days to reach you.
Â
Q: How many days for production?
A: It will take about 25-30 days for one 20ft container.
Â
Q: What's your payment term?
A: Payment term is as below:
1. T/T, 30% deposit, balance before shipment or against B/L copy.
2. T/T, 30% deposit, 70% by L/C at sight.
Â
Looking forward to creating long term relationship with you, thanks!
1. Has strong penetration, emulsify decomposition,
2.Can quickly remove the dirt, dust, grease in the engine surface.
3.Can also be used for removing generator, industrial machinery and other objects.
Â
Direction:
1. Stop the engine to keep it in nomal temperature;
2. Shell well before spray;
3. Spray on the surface of the engine, wait for several minutes, then wipe with brush.
Â
Cautions:
1. Keep away from Children;
2.Operate in ventilated place;
3. Store the product in the place under 40 centigrade;
4. Don't put it in the car and keep away from heat and fire.
Packaging & Shipping
Product Name | Engine Degreaser Cleaner |
Item No. | G1009 |
Volume | 650ml |
Packaging | 24pcs/carton |
Shipping | 850 cartons/20FCL, 1900 cartons/40HQ |
Â
Our Services
 1. OEM & ODM is offered;
2. Private label design;
3. Provide free samples;
4. Manufacturing according to customer's sample&specification.Â
Â
Company Information
Guangzhou GL Industry Co., Ltd. was founded in 2001. It is a manufacturer specialized in car care products with more than 15 years experience, holding the brand GL.
Our factory is located Baiyun distirct,Guangzhou. It is near Baiyun Internationl Airport and just need a half hours. Welcome to visit our factory!
We own professional technical team and strict production requirements to ensure standards
high-quality products.
FAQ
Â
Q: Are you manufacturer or trading company?
A: We are car care products manufacturer with 10 years experience, and specialize in producing lubricants, refrigerant gases, car clean and polish sprays, and other maintenance products!
             Â
Q: Where is your factory?
A: Our factory is located in Longteng Industrial Part, Longgui Town, Baiyun District of Guangzhou, China. Half hour from Baiyun Airport. If you want to visit us, there are following ways:
1. We will go to pick you up in the airport or your hotel in Guangzhou.
2. You can come by taxi.
3. Come by metro. Please take line 3 to Longgui Station, then exit from gate B2, then we go to B2 to pick you up.
Â
Q: Can you make my own brand and design? Is there any extra charge?
A: Yes, OEM and ODM is available. We can make customers' own brands and design without any extra charge. You can send us the designs you have created in CDR or AI or PDF format. Or tell us your idea, then our designer will figure it out.
Â
Q: What's the MOQ (minimum order quantity)?
A: Our own GL brand and package has no MOQ;
  Private brand and design is 5000pcs for each item.
  Â
Q: Is it possible to get free samples? How can we get it?
A: Yes, samples are free within 5pcs. Samples will be sent by courier through special agents in unregular way. Because they are dangerous goods, and there is no any courier can accept them normally. But new customers need to pay for the courier cost. We will surely deduct the cost from the amount when customers place orders. It's better to send us the cost by Western Union. It's safe, fast, and has small extra handling charge. After receiving the cost, samples will be sent out immediately by TNT, DHL or EMS. It will take about 5-7 days to reach you.
Â
Q: How many days for production?
A: It will take about 25-30 days for one 20ft container.
Â
Q: What's your payment term?
A: Payment term is as below:
1. T/T, 30% deposit, balance before shipment or against B/L copy.
2. T/T, 30% deposit, 70% by L/C at sight.
Â
Looking forward to creating long term relationship with you, thanks!
The main feature of the Desktop Cnc Router is the small and simple structure under the special spindle design. Various materials can be applied by the machine, such as PVC, Acrylic, wood, PCB, even some soft metal like aluminum and copper. Besides, all the machines are equipped with Mach3 controller. In addition, the machine can achieve the performance of good resolution and less noise with ball screw.
Product Description:
2. UTECH 3040 3axis 800W - is a professional mini- size machine with working area 300 x 400 mm (30 x 40 cm). Has the most powerful ruler in the spindle: XYZ. The spindle has a water cooling - it provides reliability and long service life.
3. Difficult to think of the problem, which cannot handle this car. The only limitation to the possibilities in front of large and heavy brethren: Stage size and speed of processing, and in the aggregate: functionality, compactness and price - out of competition.
4. The machine can easily be placed in a small workshop or home. Will apply for relief 3d- treatment (three-dimensional objects , reliefs, souvenirs, cliche) , engraving (personalization items , creating labels , jewelry , engraving PCBs ) , all types of cutting (letters and labels , signs , models ) , drilling.
Product use:
B. Graphite electrode processing, carving PCB circuit board, wood model mold crafts.
C. 3d sculpture of aluminum alloy, copper and other metal materials according to the feed rate.
D. Can be used as a simple three-dimensional numerical control platform, such as numerical control point glue, numerical control positioning, metal marking.
The main types of treatment:
EtchingCutting
3d- milling
Boring
Milling and engraving on a rotating axis.
Wood
Plastic
Chipboard, MDF , plywood
Light metals (copper, aluminum , brass)
Advertising industry
Creative workshops
Jewelry / designer items
Merchandise
Interior and decor elements
Type
6040
3040
3020
Max working travel
XYZ=400*570*75mm
XYZ=290*380*60mm
XYZ=210*300*60mm
Machinable material thickness
≤100mm
≤70mm
≤70mm
Dimensions
750*570*390mm
525*400*290mm
440*310*290mm
Frame material
6061-T5 aluminium alloy
6061-T5 aluminium alloy
6061-T5 aluminium alloy
Track type
Chrome-plated + linear bearing
Chrome-plated + linear bearing
Chrome-plated + linear bearing
Spiral type
Ball screw, diameter of 16mm, Thread pitch 5mm
T-screw, diameter of 12mm, Thread pitch 2mm
T-screw, diameter of 12mm, Thread pitch 2mm
Ball screw, diameter of 12mm, Thread pitch 4mm
Ball screw, diameter of 12mm, Thread pitch 4mm
Mechanical resolution
XYZ axis:0.0025mm/step
XYZ axis:0.0025mm/step
XYZ axis:0.0025mm/step
PositionaI accuracy
0.05mm
0.05mm
0.05mm
Spindle motor
Frequency conversion spindle, 0.8kw
2-300W DC spindle
2-300W DC spindle
Revolving speed
24000rpm/min
11000rpm/min
11000rpm/min
Holder
ER11(3.175mm,6mm)
ER11(3.175mm,6mm)
ER11(3.175mm,6mm)
XYZ motor
Stepper motor JK57HS76-4204B-01AF
Stepper motor JK57HS41-2004XB-01AF
Stepper motor JK57HS41-2004XB-01AF
Stepper driver
High performance, independent of each axis
High performance, independent of each axis
High performance, independent of each axis
Feed rate
2000mm/min
1500mm/min
1500mm/min
Communication Interface
USB2.0
USB2.0
USB2.0
System requirement
WIN-XP or WIN-7
WIN-XP or WIN-7
WIN-XP or WIN-7
Instruction code
G code/.nc/.ncc/
.tab/.txt
G code/.nc/.ncc/
.tab/.txt
G code/.nc/.ncc/
.tab/.txt
Voltage
Input 85V-240VAC(400HZ)
Input 85V-240VAC(400HZ)
Input 85V-240VAC(400HZ)
Operating environment
Temperature: 5℃-40℃; Humidity: 35%-80%
Temperature: 5℃-40℃; Humidity: 35%-80%
Temperature: 5℃-40℃; Humidity: 35%-80%
Packaging size
45.8kg (86*62*48mm)
25.5kg(61.5*48.5*38.5 mm)
22kg(51*40*38.5mm)
Mini Desktop Cnc Router
Mini Desktop Cnc Router,Mini Cnc Router,Small Cnc Router,Mini Desktop Cnc Router Machine
Shandong U-May CNC Technology Co., Ltd. , http://www.utech-group.com