3 Ton Manual Crane Hoist Hsz Type 3 Ton Chain Pulley Block

Brief Introduction:

Hand chain hoist is a kind of widely used and portable manual operating hoisting machine,especially widely used on no power and liquied homework. It is popular for hangging it in the load-bearing structures, steel beam, tripod, rod or the trailer. It can be used in machine installation,products lifting and loading (unloading) in industry, agriculture,construction and mineral production. It is suitable to be used in the open air and no electric power works.
 
Theory
 
Chain as the upgrade version of the crown block, fully inherited the advantages of the crown block, at the same time adopting reverse non-return brake speed reducer and the combination of the chain pulley block, symmetry secondary spur gear rotating structure, simple, durable and efficient
 
Hand chain hoist operation notice:
pls check the lifting hook if it is firmed and Check whether there is any wrong twist on lifting chain link in order to avoid lifting chain is stuck
when lifting, operator should stand with same plane with the hand chain wheel, then pull the hand chain with gentle power In case the hand chain jumpy and snap ring.
if has the phenomenon that can not pull, pls do not pull with yank power, at this time, you should check carefully.
for ratchet and pawl springs, should often check, in order to prevent the brake failure and weight falling
when lifting, can not use your hand to touch the lifting chain, otherwise it will lest hurt fingers
pls do not over weight used.



Specifications:
 
The 8 characteristics are to make the chain block have high ability and security, high agility, and this greatly reduce work intension and have long life time. 

(1) Gear They are innovated symmetrical arrayed high speed synchronous gears,and are made of international standard gear steel.Compared with common gears,they are more wearable and steadier,and more laborsaving.
(2) Chain Adopt high strong chain and high precision welding technology, meet ISO3077-1984 international standard; fit for gusty overload work conditions; bring your hands a better feeling. 
(3) Hook Made of high-class alloy steel, it has high strength and high security by using the new design. 
(4) Limit Switch Using limit switch component in design to protect the chain and ensure the security
(5) Components The main components are all made of high-class alloy steel, with high precision and security.  
(6) Framework Slight design and more beautiful; with less weight and smaller work area.
(7) Plastic Plating Adopt advanced plastic plating technology inside and outside, it looks like a new one after years of operation.
(8) Enclose Made of high-classed steel, more firm and dexterous.

Components of chain pulley block:

Packaging & Shipping   

1.Packing Method
(1) High quality carton or wooden case    
(2)Packing can be according to customer's requirement
2.Shipping Delivery
(1)By sea to your nearest port
(2)By air to your nearest airport 
(3)By express (DHL,UPS,FEDEX,TNT,EMS)to your door
 When your order shipping out .we will provide you a tracking no in express or B/L. then you can know clearly the status of the goods  



Our Services  
1.We can make special sample according to the customer's requirement. 
2.We can provide OEM service and design label for you.
3.We can product the goods according to your requirement(color,lifting height,lifting chain material) 
4.We can pack the goods according to your requirement(carton,wooden case,pallet) 
5.We test the quality of all products before delivery

FAQ    
1.Q:What is our factory product range?
    A:1) We are specialize in electric motor, chain block, lever block, electric hoist, webbing sling, cargo lashing, hydraulic jack, forklift, mini crane, etc.
     2) Hoist Accessories: Load chain, wire rope, rigging, hook ,pulley and shackles. 
2.Q:How about sample policy?   
   A:We accept sample order. Please inform your detailed sample requirement, such as the model, the capacity, the lifting height and so on. If we have the sample in stock , the ship will be quicker. If we don't have stock, please understand to wait for the produce. The sample fee and express fee usually paid by client, for special policy need to apply by client and approved by our leaders.     
3.Q:Which payment way is available?     
   A: 1)L/C,T/T,Western Union    
     2)30% T/T in advance ,70% T/T after receiving the copy of B/L.  
         100% L/C at sight(long cooperation ).    
4.Q:How to make an order?    
   A:Please send us your purchase order by Email or Fax,   
    1) Product information: Quantity, Specification (capacity, lifting height, voltage, size, material, color and packing requirement), 
    2) Delivery time required. 
    3) Customer information: Company name, Address, Phone number, Destination seaport/airport.
    4) Ship by FOB or CIF. 

Any Inquiry, please feel free to contact us!

Contact Information:
 
Brief Introduction:

Hand chain hoist is a kind of widely used and portable manual operating hoisting machine,especially widely used on no power and liquied homework. It is popular for hangging it in the load-bearing structures, steel beam, tripod, rod or the trailer. It can be used in machine installation,products lifting and loading (unloading) in industry, agriculture,construction and mineral production. It is suitable to be used in the open air and no electric power works.
 
Theory
 
Chain as the upgrade version of the crown block, fully inherited the advantages of the crown block, at the same time adopting reverse non-return brake speed reducer and the combination of the chain pulley block, symmetry secondary spur gear rotating structure, simple, durable and efficient
 
Hand chain hoist operation notice:
pls check the lifting hook if it is firmed and Check whether there is any wrong twist on lifting chain link in order to avoid lifting chain is stuck
when lifting, operator should stand with same plane with the hand chain wheel, then pull the hand chain with gentle power In case the hand chain jumpy and snap ring.
if has the phenomenon that can not pull, pls do not pull with yank power, at this time, you should check carefully.
for ratchet and pawl springs, should often check, in order to prevent the brake failure and weight falling
when lifting, can not use your hand to touch the lifting chain, otherwise it will lest hurt fingers
pls do not over weight used.



Specifications:
 
The 8 characteristics are to make the chain block have high ability and security, high agility, and this greatly reduce work intension and have long life time. 

(1) Gear They are innovated symmetrical arrayed high speed synchronous gears,and are made of international standard gear steel.Compared with common gears,they are more wearable and steadier,and more laborsaving.
(2) Chain Adopt high strong chain and high precision welding technology, meet ISO3077-1984 international standard; fit for gusty overload work conditions; bring your hands a better feeling. 
(3) Hook Made of high-class alloy steel, it has high strength and high security by using the new design. 
(4) Limit Switch Using limit switch component in design to protect the chain and ensure the security
(5) Components The main components are all made of high-class alloy steel, with high precision and security.  
(6) Framework Slight design and more beautiful; with less weight and smaller work area.
(7) Plastic Plating Adopt advanced plastic plating technology inside and outside, it looks like a new one after years of operation.
(8) Enclose Made of high-classed steel, more firm and dexterous.

Components of chain pulley block:

Packaging & Shipping   

1.Packing Method
(1) High quality carton or wooden case    
(2)Packing can be according to customer's requirement
2.Shipping Delivery
(1)By sea to your nearest port
(2)By air to your nearest airport 
(3)By express (DHL,UPS,FEDEX,TNT,EMS)to your door
 When your order shipping out .we will provide you a tracking no in express or B/L. then you can know clearly the status of the goods  



Our Services  
1.We can make special sample according to the customer's requirement. 
2.We can provide OEM service and design label for you.
3.We can product the goods according to your requirement(color,lifting height,lifting chain material) 
4.We can pack the goods according to your requirement(carton,wooden case,pallet) 
5.We test the quality of all products before delivery

FAQ    
1.Q:What is our factory product range?
    A:1) We are specialize in electric motor, chain block, lever block, electric hoist, webbing sling, cargo lashing, hydraulic jack, forklift, mini crane, etc.
     2) Hoist Accessories: Load chain, wire rope, rigging, hook ,pulley and shackles. 
2.Q:How about sample policy?   
   A:We accept sample order. Please inform your detailed sample requirement, such as the model, the capacity, the lifting height and so on. If we have the sample in stock , the ship will be quicker. If we don't have stock, please understand to wait for the produce. The sample fee and express fee usually paid by client, for special policy need to apply by client and approved by our leaders.     
3.Q:Which payment way is available?     
   A: 1)L/C,T/T,Western Union    
     2)30% T/T in advance ,70% T/T after receiving the copy of B/L.  
         100% L/C at sight(long cooperation ).    
4.Q:How to make an order?    
   A:Please send us your purchase order by Email or Fax,   
    1) Product information: Quantity, Specification (capacity, lifting height, voltage, size, material, color and packing requirement), 
    2) Delivery time required. 
    3) Customer information: Company name, Address, Phone number, Destination seaport/airport.
    4) Ship b

ZXE1 Series AC/DC Arc Welding Machine

Dc Arc Welder,Ac Arc Welder,Welding Machine

Juba Welding Equipments Manufacturing Co., Ltd. , http://www.zjweldingmachine.com